65.
Position
Porch
Side
Bottom Skirting
on the side of the shed.
The piece on the porch section will overlap the Front Skirting. When
aligned there will be a gap on the shed side of the porch, this will be
covered by trim pieces in
Step 70
. Attach with
4 - 1 1/2” Finishing
Nails
per piece.
Side Overhangs
Front Skirting
Flush
Small Gap to be
covered by trim
66.
Position
Rear
Bottom Skirting - Bevel
around the base of the shed. Bevel is thicker at butt and thin-
ner at top of board. Skirting will hide floor framing. Gaps on side will be covered by Narrow & Wide Trim
pieces later. Start on side walls first and attach with
4 - 1 1/2” Finishing Nails
per piece.
Parts (Steps 65)
Porch Side Bottom Skirting
(1/2” x 4 1/2” x 44 1/2”)
x 2
Hardware (Steps 65)
N1
- 1 1/2”Finishing Nails
x 8 total
Parts (Steps 66)
Rear Bottom Skirting- Bevel
(1/2” x 4 1/2” x 45 1/4”)
x 6
Hardware (Steps 66)
N1
- 1 1/2” Finishing Nails
x 36 total
Skirting seam
aligned with
wall seam.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 37
