53.
Align Middle Roof Panel as per
Step 52
and screw panel down to rafters with
2 - 2 1/2” screws
in the bottom row of shingles. Lift up 2nd Outside Roof Panel on
Rafters as per
Step 51
.
Roof Plywood inset
1/8” from rafter end
51.
Place Outside Roof Panel so it sits flush on 3rd rafter from the outside (doubled up rafter).
Plywood on roof should be inset 1/8” from end of rafter at bottom.
3rd Rafter from
the outside
Screw bottom row of shingles down
to rafter with 1 - 2 1/2” screw.
Hardware (Step 52)
S1
- 2 1/2” Screws
x 1 total
52.
From the outside, screw down through bottom row of shingles into
Rafter
with
1 - 2 1/2” screw
. Locate
Middle Roof Panel
(roof plywood flush with out-
side shingles) and place on middle
Rafters
.
Hardware (Step 53)
S1
- 2 1/2” Screws
x 2 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 31
