Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 7
9.
Position 2nd
Back Wall Panel (2C)
on Floor as per
Step 8
. Attach wall frames together at top, middle
and bottom with 3 - 2 1/2” screws. Secure bottom wall plate to floor with
4 - 2 1/2” Screws (C).
Right Side
Angled Wall
Panel
Back Wall
Panel
10.
In the corner, align and attach right
Side Wall (2A)
framing to back wall framing as per
Steps 7 & 8
. Secure bottom wall plate of side wall to floor with
4 - 2 1/2” Screws (C).
Expert Advise
-
If you’re placing the
shed tight up against a fence or wall,
you may consider attaching the Rear
Corner and Center Trim (4H & 4J) on
Back Wall seam first. See Step 38.
Attach both Back Walls together,
secure Rear Center Trim, then attach
Side Wall Panel.
2 1/2”
screw
Gap at Front with bottom
of wall siding flush with
outside of floor.
