Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 19
46.
Attach
Door Handles (X)
to doors
with
3 - 3/4” Black Headed Screws (J)
per handle. Choose desired handle height.
Make sure screws go into interior door
framing and are not exposed on inside.
47.
Attach
Black Barrel Bolt (W)
as illustrated above with
6 - 3/4”
Black Headed Screws (J).
Note:
Female part of barrel bolt is
positioned higher than male. Do a
dry run first to position barrel bolt
correctly.
Important
- Drill pilot
holes with 1/8” drill bit prior to
securing with screws to prevent
wood splitting.
Important: Drill shallow Pilot
Holes to prevent splitting.
UU
Interior Door Frame
48.
Install the
Barrel Bolt
Plywood Spacer (UU)
to
interior door frame, flush at
the bottom, and 1/4” from
edge, as pictured. Use
2 - 1 1/4” Screws (E)
to
secure.
Mark door
stop.
49.
Position the
Interior Silver Barrel Bolt (BB)
on the plywood spacer and attach with
4 - 3/4” Silver
Screws (G).
Tap barrel bolt with hammer on underside of interior door stop to mark location.
BB
G
45.
Attach both
Lower Side Narrow Trims (4R)
(1/2” x 2 1/2” x 33 1/8”).
Place trims between front and
rear corner trims to cover part of floor frame with
4 - 1 1/2” Finishing Nails (K).
Side Trim
(4R)
