manualshive.com logo in svg

OLT Grand Garden Chalet 6X3-BEVEL, Assembly Manual

Share
Download
OLT Grand Garden Chalet 6X3-BEVEL Assembly Manual Download Page 13

Toll Free 1-888-658-1658           www.outdoorlivingtoday.com            [email protected]  

Page 13

27. 

From inside the shed, start securing the roof by screwing the door header into Roof Panel on an

angle with 

3 - 2 1/2” Screws (C).

Make sure screw tips do not go completely through roof panel.  On the

sides and rear, screw from upper framing into Roof Panel. Use 2 screws per each wall panel. Screw on
an angle and make sure screw tips do not go completely through roof panel.

28. 

Locate 2 

Front Filler Trims (4A)  (1 1/2” x 5/8” x 65”).  

Filler trim will be covered by corner trim in 

Step 37

.  Attach in

each front corner with 

6 - 1 1/2” Finishing Nails (K).

29. 

Locate 

Front Horizontal Trim (4B)  

(3 1/2” x 1 1/4” thick at top x 68 1/4”).  

Position horizontal trim tight up underneath roof
panel. From side-to-side evenly space. Secure
with 

6 - 2 1/2” Screws (C) 

into door header. 

Front Horizontal Trim (4B) 
3/4” thick with additional bevel
attached to back - Thick side up

2 1/2” Screws

Summary of Contents for Grand Garden Chalet 6X3-BEVEL






















Reviews:

No comments

Brands by name

Popular brands

Load more brands