26.
Position and secure 2nd Wall Extendor Panel as per
Steps 24 & 25
. Additionally, attach to first
Extendor with
2 - 2 1/2” Screws
.
Pilot Hole
first.
28.
Align
Horizontal Wall Cleats
(1 @ 3/4” x 3 1/2” x 70”, 1 @ 3/4” x 3 1/2” x 21”) flush with top of
Rear Wall framing. To help strengthen the Rear Walls, there is a short and a long wall cleat which
meet off-center from the seam between walls. Attach Cleats with
8 - 1 1/4” Screws
.
27.
With Extendor Walls attached, position
Extendor Wall Cleats
(2 @ 1 1/2” x 2 1/2” x 42 3/8”)
in the lower section of each Extendor Wall. Attach with
3 - 2 1/2” Screws
per cleat.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 15
