35.
With Rafter Section correctly aligned, secure rafters to walls using
90° Metal Brackets
. Start with
outside rafters and secure 2 Brackets with
4 - 1 1/4” Screws
per bracket. Screw into Wall Extension
Framing at the front, and Wall Panel top framing at the rear. Complete both sides.
90° Metal Brackets
36.
With outside rafters properly secured, completely secure remaining interior rafters using
8 - 2 1/2” Screws
. Screw into rafters from inside of Extension Wall framing at front of shed and inside
Rear Wall framing at rear of shed, behind Horizontal Wall Cleats.
Front
Rear
37.
There are 3 different plywood roof panel sizes required to complete roof.
48” wide x 32” long x 2 pcs. -
Long Plywood Roof Panel
48” wide x 21 3/4” long x 2 pcs. -
Short Plywood Roof Panel
4” wide x 53 3/4” long x 1 pc. -
Center Plywood Roof Panel
Starting with rear left corner, position
Long Plywood Roof Panel 9
(48” wide x 32”
long) rafters. Plywood will overhang outside rafter by 2”. In the front, plywood will
be recessed 1/8” back from rafter end.
2” overhang
Sits on outside of middle rafter
1”, and recessed 1/8” from edge
48”
32”
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 20
