Front Soffit Boards (2)
Rear Soffit
Boards (2)
48”
21”
43 1/2”
96”
A.
B.
C.
Rear Sof
fit
Mid Rafter
Mid Rafter
Rear
Front Soffit
Screw center rafters together
with 6 - 2 1/2” screws.
Note: We recommend you drill a 1/8” pilot hole for each
screw, to avoid splitting wood. The hole depth should be
equal to 3/4 the length of screw.
Confirm angles on rafter
ends are aligned.
31.
Locate 7
Rafters
, 2
Rear Soffits
and 2
Front Soffits
. Center Rafter has 3/4” cleats attached on both
sides making the width 3”. Lay out on level ground and assemble as shown in Illustrations
A
through
C
below.
Attach Soffit Boards flush to end of outside rafters with 2 - 1 1/4” screws per rafter end.
Important:
Drill pilot holes in Soffit ends to prevent splitting. Measure and attach interior Rafters as illustrated
above. Measure and attach remaining Soffit/Rafter connections using 2 - 1 1/4” screws per rafter/soffit.
Mid Rafter with Cleats
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 18
