Thank you for purchasing our 8x4 GardenSaver -Single Door Shed.
Please take the time to identify all the parts prior to assembly.
Parts List:
A. Floor Section
1 - 45 ½” x 75” -
Large Floor Frame
(2 Joists unattached)
1 - 45 ½” x 21” -
Small Floor Frame
(2 Joists ATTACHED)
2 - 1 ½” x 3 ½” x 72” -
Floor Joists
(Steps 1 - 3)
5 - 1 ½” x 3 ½” x 45 ½” -
Floor Runners
(Steps 4 - 6)
1 - 5/8” x 45 ½” x 75” -
Plywood Flooring
1 - 5/8” x 45 ½” x 21” -
Plywood Flooring
(Steps 7 - 8)
B. Wall Section
4 - 1 ½” x 2 ½” x 45 ½” -
Wall Plates
4 - 45 ½” x 75” -
Solid Wall Panels
1 - 45 ½” x 75” -
Window Wall Panel
1 - 12” x 73” -
Narrow Wall Panels
(Steps 9 - 18)
1 - 2” x 3 ⅜” x 45 ½” -
Door Header - (Dado top edge)
2 - ¾” x 3 ⅜” x 73” -
Door Jambs - Vertical
(Steps 19 - 21)
2 -
Top Triangular Siding Pc for
Angle Wall Extendors (L/R)
2 - 4
5 ¼
” -
Angle Wall Extendors (L/R)
2 - 9” x 45 ½” -
Wall Extendors
(Steps 22 - 28)
1 - ¾” x 3 ½” x 70” -
Horizontal Wall Cleat
1 - ¾” x 3 ½” x 21” -
Horizontal Wall Cleat
(
Step 29)
C. Rafter & Roof Section
6 - 1 ½” x 2 ½” x 54” -
Rafters
2 - ½” x 3 ½” x 48” -
Front Soffits
2 - ½” x 3 ½” x 48” -
Rear Soffits
(Steps 31 - 36)
2 -
Rafter/Facia Nailing Strips
- ¾” x ¾” x 51”
(Step 37)
2 -
Roof Panels
- 51” w x 56” d (1 - Left 1- Right)
(Steps 38 - 40
)
4 - 5 ½” Wide x 16” to 18” long -
Filler Shingles
(Steps 41 - 44)
D. Miscellaneous Section
(Skirting, Trim, Door, Facia & Misc. Parts
)
6 - ½” x 4 ½” x 45
¼
” -
Bottom Skirting
(Bevel Siding)
(Steps 47 - 50)
8 - ¾” x 2 ½” x 36” -
Corner Filler Trims
2 - ¾” x 2 ½” x 10” -
Front Center Corner Filler Trims
(Steps 51 - 53)
2 - ½” x 5 ½” x 79” -
Rear Corner Trims
2 - ½” x 5 ½” x 88 ¾” -
Front Corner Trims
2 - ½” x 2 ½” x 80” -
Side Rear Corner Trims
2 - ½” x 2 ½” x 88 ¾” -
Side Front Corner Trims
1 - ½” x 2 ½” x 79” -
Rear Middle Trim
(Steps 54 - 57)
2 - ½” x 3 ½” x 77 ½” -
Vertical Door Trims
1 - ½” x 2 ½” x 46 ¾” -
Horizontal Door Trim
1 - ½” x 3 ½” x 8 ¾” -
Front Middle Trim
(Steps 58 - 60)
1 - 31
½”
x 72” -
Full Door
(Steps 61 - 63)
2 - ½” x 4” x 54 1/8” -
Side Facia
(Angle Cut Ends) - reverse
4 - ½” x 4” x 50 ½” -
Front and Rear Facia
(Steps 64 - 66)
2 - ½” x 4 ½” x 51 5/8” -
Roof Ridge Boards
(Step 67)
2 -
Detail Facia Plates
(4” high)
(Step 68)
1 - ½” x ½” x 32” -
Upper Horizontal Door Stop
4 - ½” x ½” x 36 ¼” -
Vertical Door Stops
(Steps 69 - 70)
1 Aluminum Window Insert
(Steps 71 - 72)
Window Trim Pkg
1 - 24 1/16” angle cut / 3 - 23” Straight Cut -
Window Trim Kit
(Step 73)
1 Flower Box Kit
(Step 74)
1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall
panel siding is damaged or to shim floor or door.
Optional Pieces - When Door configured on end.
1
-
1 ½” x 3 ⅜” x 73” - Optional Door Jamb
1 - ½” x 2 ½” x 42 ½” - Optional Horizontal Door Trim
1 - ½” x 2 ½” x 88 ¾” - Optional Front Middle Trim
(Optional - Steps 77 - 80)
Note: All Trim, Facia and Bottom Skirting pieces
will be positioned rough face out when installed.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 4
