![background image](http://html1.mh-extra.com/html/olt/12x12-spacemaker-garden-shed/12x12-spacemaker-garden-shed_assembly-manual_3827410005.webp)
57 - 66
Steps
4. Trim & Miscellaneous Section
Outer Wall Trim & Door
9 - 3/4” x 4 1/2” x 45 1/4” - Bottom Skirting (Bevel) - Solid Wall
2 - 3/4” x 4 1/2” x 33 3/4” - Bottom Skirting (Bevel) - Window Wall
1 - 3/4” x 4 1/2” x 68 1/2” - Bottom Skirting (Bevel) - Door
4 - 7/8” x 2 1/2” x 81 3/4” - Filler Trims
6 - 3/4” x 1 1/2” x 45 1/4” - Top Wall Trims
3 - 3/4” x 4 1/2” x 45 1/4” - Horizontal Gable Trims (Rear) - Bevel
1 - 3/4” x 4 1/2” x 68 1/2” - Horizontal Gable Trims (Door) - Bevel
2 - 3/4” x 4 1/2” x 32 1/4” - Horizontal Gable Trims (Window) - Bevel
8 - 1/2” x 2 1/2” x 87” - Side Trims
4 - 1/2” x 5 1/2” x 90” - Wide Corner Trims
2 - 1/2” x 2 1/2” x 85” - Rear Wall Trims
2 - 1/2” x 3 1/2” x 85” - Vertical Door Trims
Facia Trim
8 - 3/4” x 1 1/2” x 40” - Facia Cleat
4 - 3/4” x 5 1/2” x 81 1/4” - Front and Rear Facia Angled
4 - 3/4” x 5 1/2” x 71 1/4” - Side Facia
2 - 9 1/2” x 7 3/8” - Pentagon Detail Plates
2 - 8” x 5 1/2” Facia Detail Plates
4 - 8” x 4 1/2” Front & Rear Detail Plates
Miscellaneous
2 - 31 1/2” x 72” - Left & Right Doors (1 each)
2 - 1/2” x 2 1/2” x 72” - Interior Vertical Door Stops
1 - 1/2” x 2 1/2” x 68” - Interior Horizontal Door Stop
1 - 3/4” x 2 1/2” x 62 1/2” - Door Threshold
1 - 1/2” x 2 1/2” x 71” - Interior Door Flange
2 - Regular Window Inserts
2 - Regular Window Trim Pkgs
2 - Flower Box Kits
2 - Spare Bevel Siding
1 - Spare Lap Siding
2 - Spare Shingles - use to shim door, etc
73 - 83
67- 72
Advice:
Wood has a tendency to split when
screwing near the ends of a board. To prevent
splitting, it is always recommended to pre-drill
pilot holes before screwing into these areas.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 5
Note:
Trim Pieces are to be installed with the rough side facing out. Rough side is graded as best
face.