![background image](http://html1.mh-extra.com/html/olt/12x12-spacemaker-garden-shed/12x12-spacemaker-garden-shed_assembly-manual_3827410032.webp)
52.
Using
6 - 2” Metal Roof Screw
and
1/4” Nut Driver
, partially secure
Metal Roof Panels
down
to the middle
Batten
row. Only fasten screws half way so the
Metal Roof Hangars
can be removed.
Metal Screw is self-tapping, do not overtighten screw into the center of
Battens
, 27 more
2” Metal Screws
will be used to secure roof to lower
Batten
once hangars are removed.
51.
Once the
Metal Roof Panels
are spaced correctly from side-to-side and top-to-bottom, lift 4
panels up and run a bead of caulking down the overlapping seams of each panel to seal the joints.
Place panels down one by one once seam is caulked. You will likely need assistance from a helper for
this step.
Bead of caulking
Bead of caulking
Important:
Metal Roof Hangars
will be removed in
Step 53
.
Screw into center of Battens.
53.
Before fully fastening
Metal Roof Panels
down, remove
Metal Roof
Hangars
and insert
Foam Enclosures
between Metal Roof Panels and
bottom Battens. Enclosures will prevent moisture and unwanted bugs from
entering your shed through here.
Parts (Step 53)
Foam Enclosures
(Several Pieces)
Important:
Remove Metal
Roof Hangars
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 32
Important:
screw into perak of
roof panels not trough.