76.
After all Roof Panel Sections have been positioned
and partially secured, slight adjustments to some panels
may be necessary to achieve best fit. Remove previously
secured bottom screws installed in Roof Panels and
re-position if necessary.
Important -
Any gaps between Roof Panels will be
covered later by
Roof Ridge Caps
and
Filler Shingles
.
78.
Locate 64 1/2” long
Facia
Boards.
Facia Boards are angle cut on
each end. Place 1 board over the
entrance way underneath the roof and
against the rafter ends.
Facia Board should be positioned
so it is flush underneath the roof
panel and angle cut end of board
should sit halfway on Rafter end.
77.
Important
- When satisfied with Roof
Panel positioning, further secure panels to
gazebo. Screw through Roof Panels into
Corner Rafters
ONLY
at mid and top locations
with 3” screws. See illustration above for
screw pattern. Roof will be secured to Mid
Rafter while securing Filler Shingles later.
DO NOT SECURE ROOF TO MID RAFTERS
AT THIS TIME.
Reach through Skybox while securing Roof
Panels at the top.
Sits equally on Rafter end
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 27
Facia Board
