Outdoor Living Today www.outdoorlivingtoday.com sales@outdoorlivingtoday.com
Page 12
24.
Locate 8 Skybox
Pieces placing them with
Dado cut facing out and to
the top.
25.
Position 2 pieces together so
angle cut ends line up. When
correctly aligned, screw together
using 1 - 3” screw and 1 - 2” screw
in top dado ledge as shown in
above illustration. Attach remaining
pieces to complete Skybox.
Flip Skybox over when complete.
26.
Position Wind and Snow Load Roof Rafter Bracket on to Skybox as shown above. Screw bracket
with 1 1/4” screws into pre-drilled holes of bracet in sides, edge and back. Make sure bracket is aligned
evently and flush with wood in each corner before fastening.
B. Rafter Section
2” screw
3” screws
Caution
- Next you will be installing Rafters. Rafters
will be unstable until Upper Rails Sections are
completed in
Step 34
. Rafters must be secured to
Upper Rails and cannot be left unattended.