39.
Lift up, position and secure all remaining Upper
Rail Sections using
Steps 36-38
.
Important
-
Snug Bolts down but don’t over-tighten
.
40.
On your last Upper Rail Section, use Carriage
Bolt from the first section to secure. Use Wood
Clamps or have assistant push Rail / Rafter together.
38.
Hammer in 3rd Carriage Bolt into left side of
second Upper Rail Section as per
Step 36.
3rd Carriage
Bolt
42.
Lift and position a
Mid Rafter end
(66 9/16”) flush against Skybox. Use a straight edge to confirm
same height as Corner Rafters. Position Mid Rafter centered on Skybox. When correctly positioned
attach rafter to Skybox with 2 - 3” screws (screw from inside Skybox).
Mid Rafter
Inside of Skybox
2 - 3” screws
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 16
37.
Lift a second Upper Rail Section into place and
slide carriage bolt through End Cap hole. Place a
flange nut over bolt and snug nut down.
Flange Nut.
2nd Upper Rail Section
