11
- Operating Lights
5.5.1
- Concept LED
To turn On/Off the operating light: press the operating light
control (1) on the chair base (
section 5.3
) or command panel
(
section 5.4
).
To change the light intensity: hold the operating light control button pressed
for more than 2 seconds.
5.5.2
- Concept Plus (Optional)
To activate the operating light: press the
operating light command (1) on the chair base
(
section 5.3
) or on the command panel
(
section 5.4
) to enable sensor (3) and control
lever (2).
To turn On/Off the operating light: pass
the hand in front of the sensor (3)
approximately 5 cm away or turn to left or right
the control lever (2).
To change the light intensity: hold your hand in front of the sensor (3) or
hold the control lever (2) to the left or to the right until the operating light shows the desired intensity.
5.5.3
- Premium LED (Optional)
To activate the operating light: press the operating light command (1)
on the chair base (
section 5.3
) or on the command panel (
section 5.4
) to
enable sensor (5) and control knob (4).
To turn On/Off the operating light: pass the hand in front of the
sensor (5) approximately 5 cm away or press the control knob (4).
To change the light intensity: hold your hand in front of the sensor (5)
or turn the control knob (4) until the operating light shows the desired
intensity.
- Water Unit and Assistant Module (Optional)
The water unit may display water controls for the bowl flush and cup filler according to the equipment
configuration. The cup filler water spout is removable.
To control the flow of water for cup filler (2) and spittoon bowl (1), the water unit provides a needle
valve (3).
The availability of commands and instruments on water unit
or assistant module may vary according customer order and
available handpieces.
When the equipment has assistant module, the instruments of the
water unit are transferred to the module, facilitating access for the operator, through the extension arm.
1 - Cup Filler Control
2 - Spittoon Bowl Control
3 - Water Unit Valve
4 - Assistant Module
5 - Vacuum Pump Adaptor
3 - Venturi Saliva Ejector
Summary of Contents for Flex Quality
