Olsberg PENMAN PULAR, Installation Instructions Manual

Page: 14 / 20

PAGE 14
4.0 TROUBLESHOOTING
4.1 - General Troubleshooting
The condition of proper operation of the stove is the appropriate chimney draught (feed pressure). This is
considerably dependant on the temperature of the outer environment. In case of higher outer temperature
(above 15oC) feed pressure can considerably fall and it can disturb proper operation.
What can you do?
- Open the primary air regulator a bit more and fully open the secondary air regulator
- Use only a small amount of fuel at first
- Use only a small amount of fuel when reloading
- Riddle & Grate
What are the causes?
• There is no proper draught at heating up
- Chimney or stove pipe is not closed properly
- Measurements of the chimney are not appropriate
• The space is not heating up?
- The appliance is disproportionally small
- There is too much ash in the combustion chamber
- The air regulator is closed
• The stove gives off too much heat?
- The air regulator is opened too far
- The chimney draught is too high
- Loading too much fuel
• The bottom grate is damaged?
- The stove has been overloaded
- The ash drawer wasn’t emptied in time
- Chimney draught is too high