CERO_Operators Guide_Version 2018-12_01
37
5.13.3 Cover Drive Notification
The CERO notifies when the sliding cover is closing:
-
the Open Cover Button blinks blue
-
an audible notification is triggered
This notification has been implemented to remind you to stand clear of the moving cover. You
may at your own risk, switch off the audible notification:
1.
In the System Menu, go to Settings.
2.
In the window Audible Notification, deselect “Cover notification” by clicking on it.
5.13.4 Date and Time
1.
In the System Menu, go to Settings.
2.
Select Date and time.
3.
Rotate the Click-Wheel to adjust Date and Time.
5.13.5 Message Level
The Message Level refers to the amount of information that is logged during the CERO function
and determines the size of the Outputs file. To modify the level of message proceed as follows:
1.
In the System Menu, go to Settings.
2.
Set the sesired message level:
-
„normal“ for standard use
-
“detailed“ for higher comliance needs
-
“debug” for troubleshooting purposes
5.13.6 Graph Scaling
Two scaling modes have been implemented: autoscale and manual scale. In the Autoscale
Mode (default mode), the axis are scaled automatically from the minimum measured value up
to the maximum measured value. The manual scaling mode allows defining the axis minimum
and maximum. To change the default settings follow the procedure below.
1.
In the System Menu, go to Settings.
2.
Select Graph scaling.
3.
Deselect default.
4.
Enter the desired scale.
5.13.7 Brightness of the Touch Screen (TFT Brightness)
It is possible to adjust the brightness of the touch-screen:
1.
In the System Menu, go to Settings.
2.
Select TFT Brightness.
3.
Rotate the click-wheel to set the TFT Brightness.
