Olivetti OLIBOOK S1500, User Manual

Page: 32 / 78

3 - 10 Power System
Getting Started
3
Powering ON the Notebook PC
The Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the
brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the system configuration, press [F2]
upon bootup to enter the BIOS Setup. If you press [Tab] during the splash screen, standard boot information such as the
BIOS version can be seen. Press [ESC] and you will be presented with a boot menu with selections to boot from your
available drives.
NOTE: Before bootup, the display panel flashes when the power is turned ON. This is part of the Notebook
PC’s test routine and is not a problem with the display.
IMPORTANT! To protect the hard disk drive, always wait at least 5 seconds after turning OFF your
Notebook PC before turning it back ON.
WARNING! DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce
air circulation such as a carrying bag.