21
RECEPTION MODES ...
Manual reception ...
è
è
è
Procedure
DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
22-03-99 15:10
2
Press the RX MODE
key until manual
reception is selected.
MANUAL RX
22-03-99 15:10
3
When the telephone
rings lift the receiver to
connect to the LINE.
TEL CALL
4
As soon as you hear
the fax tone or if the
remote party asks you
to receive, press the
START key.
CONNECTING
5
Hang up the handset.
The fax machine starts
receiving and the
display shows
information on the
reception in progress,
including the remote
party's fax number or, if
programmed, his name.
6
When reception is
completed, the
message "RX
COMPLETED" is
displayed for a few
seconds and then the
waiting mode.
MANUAL RX
22-03-99 15:10
If the remote party called to talk only to you, at the
end of the conversation:
If your telephone installation has several sock-
ets and the connected telephone is not near the fax
machine, you can enable the latter for remote re-
ception, as long as the telephone works with tone
dialling (multifrequency):
•
Connect to the line by lifting the telephone re-
ceiver.
•
Press the * key on the telephone, followed by
the remote control code. Remember that the
code digit must be the one you have already
programmed (see "Changing the remote con-
trol code” chapter "For a more sophisticated
use").
Automatic reception ...
The fax receives the documents automatically without
any intervention.
The fax machine is already programmed to receive the
documents in automatic mode. Otherwise, press the RX
MODE key until “AUTOMATIC RX” is displayed.
The reception procedure is explained in the previous
section (Manual reception).
Automatic reception with call type recogni-
tion ...
You have programmed the fax machine, by pressing the
RX MODE key, to receive with this mode (“PHONE/FAX
RX” has to be displayed).
The behaviour of the fax machine in this reception mode
will depend on the caller, as illustrated in the following
diagram:
-3-13-31.p65
02/04/01, 9.19
21
