47
Enabling silent reception …
You can preset the fax machine to receive documents
without ringing with the “AUTOMATIC RX”, “FAX/TEL
RX” and “TAD/FAX RX” reception modes. When this
function is enabled, the behaviour of the fax machine
depends on the reception mode selected or on who
calls it:
•
With the “AUTOMATIC RX” and “TAD/FAX RX”
modes the fax machine never rings when receiving
a call.
•
With the "FAX/TEL RX” mode the fax machine only
rings, when receiving a call, if the caller is another
fax machine.
If the incoming call is a telephone
call, the fase machine will emit an acoustic signal
instead of rinigng, to remind you to lift up the hand-
set.
In both cases, remember that if you are in programming
mode, the fax machine, when receiving a call, will always
ring independently of who calls and what reception mode
is selected.
Procedure
DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
14-03-99 16:41
2
Press the FUNCTION
key until the display
shows --->
INSTALLATION
3
Press the START key
until the display shows
--->
SILENT RX: OFF
4
Press the </> keys to
see the other option
availvable: "SILENT RX:
ON".
SILENT RX: ON
5
Press the START key
to confirm your
selection and then the
STOP key to restore
the fax machine to the
initial waiting mode.
AUTOMATIC RX
SILENT RX
Showing the caller’s identification
This function, enabled by a telephone network manager
upon the user's request, is only available in some
countries and it is compatible with the ETSI ETS 300
778-1 norms.
This function allows you to know immediately who is
calling you. Therefore, you can decide whether to an-
swer the call or not.
With this function, if the fax machine is in waiting mode
it always automatically shows, for every call, one of the
following pieces of information:
•
Your caller’s name or number
•
PRIVATE: if the caller has chosen not to reveal his
identity
•
NOT AVAILABLE: if the caller is connected to a tel-
ephone exchange which does not provide this serv-
ice.
Whereas if you are programming your fax machine and
you want to see the caller’s name or number, when
receiving a call, you must press the HOOK key before
answering the call.
However, it could happen that your caller's telephone
number is not displayed on the fax machine because of
some particularities of the telephone exchange you are
connected to. If it happens, contact the technical assist-
ance center of your country.
Changing the number of rings …
This feature is enabled only in some countries.
If the fax machine is set to automatic reception with
call type recognition, when there is an incoming call,
the fax machine will recognise automatically after ring-
ing twice whether the call comes from another fax ma-
chine (FAX) or from a telephone (PHONE).
If you wish you can change the number of times it rings
as follows:
Procedure
DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
PHONE/FAX RX
30-03-99 12:55
2 Press the FUNCTION
key until the display
shows --->.
INSTALLATION
3 Press the START key.
TEL. LINE SET-UP
☞
-7-46-54.p65
02/04/01, 9.22
47
