PUBLISHED BY:
Olivetti I-Jet S.p.A.
Località Le Vieux
11020 ARNAD (Italy)
Editors:
Olivetti Tecnost, S.p.A.
Direzione @ Home/Office
Via Jervis, 77 - 10015 IVREA (Italy)
Copyright © 2001, Olivetti
All rights reserved
The manufacturer reserves the right to make any changes to the machine described in this manual,
at any time, and without prior warning.
This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide
connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system.
However, due to differences between individual PSTNs in the various countries, the approval does
not unconditionally guarantee success operation of every PSTN termination point.
If you encounter any problems, you should contact your supplier immediately.
The manufacturers declare under their own responsibility that
this product complies with provisions laid down by the directive
1999/05/CE. Conformance is certified by the application of the
mark to the product.
Network compatibility declaration
This product has been designed and developed to operate in the networks of all European
Community countries, and in those of Switzerland and Norway.
Full compatibility with the networks of individual countries will depend on specific national software
parameters which can be set in the product. If you encounter problems with non EC PSTN networks,
contact your national technical support service.
Your attention is drawn to the following conditions that could compromise the conformity attested
above as well as the machine’s characteristics:
• incorrect electrical supply;
• incorrect installation, erroneous or improper use, or any use that differs from what is indicated
in the User Manual supplied with the machine;
• replacement of components or original parts using other types, not approved by the manufac-
turer, or where carried out by unauthorized persons.
The electrical socket must be near to hand and easily accessible. To disconnect the machine from
the electrical power supply, unplug it from the supply socket.
WARNING: THIS EQUIPMENT MUST BE EARTHED.
