Olivetti JET-LAB 500, Instructions Manual

Page: 64 / 83

52
Adjusting the volume of the buzzer ...
Procedure DISPLAY
1 Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
02-03-99 10:48
2 Press the FUNCTION
key until the display
shows --->
FAX SET-UP
3
Press the START key. DATE AND TIME
4
Press the FUNCTION
key. VARIOUS SETTING
5 Press the START key
until the display shows
---> BUZZER VOL.:LOW
6 Press the </> keys to
show the other values
available: "BUZZER
VOL.:HIGH", "BUZZER
VOL.: MED" and
"BUZZER VOL.: OFF".
In the example:
"BUZZER VOL.: HIGH".
BUZZER VOL.:HIGH
7
Press the START key
to confirm your
selection then press the
STOP key to restore
the fax to the initial
waiting mode.
AUTOMATIC RX
02-03-99 10:48
Reducing the speed transmission ...
The fax machine usually transmits at a speed of 14400
bps (bit per second). The transmission speed at 9600
and 4800 bps is advisable on disturbed telephone lines.
Procedure DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
02-03-99 10:48
2 Press the FUNCTION
key until the display
shows --->.
FAX SET-UP
3 Press the START key.
DATE AND TIME
4 Press the FUNCTION
key.
VARIOUS SETTINGS
5 Press the START key
until the display shows
--->
TX SPEED 14.4
6 Press the </> keys to
show the other value
available: "TX SPEED
9.6 and 4.8". In the
example "TX SPEED
4.8".
TX SPEED 4.8
7 Press the START key
to confirm your
selection then the
STOP key to restore
the fax to the initial
waiting mode.
AUTOMATIC RX
02-03-99 10:48
Enabling/disabling the ECM mode ...
ECM (Error Correction Mode) is a system for correct-
ing errors caused by line interference. This function is
effective only if it has been enabled both on your fax
and on that of the remote party. It is highlighted by a "E"
on the display.
The fax machine is already set to transmit with this
mode but you can set it to transmit normally as follows:
Procedure DISPLAY
1
Make sure that the
display shows the initial
waiting mode with date
and time.
AUTOMATIC RX
06-03-99 12:12
2 Press the FUNCTION
key unti the display
shows. FAX SET-UP
3
Press the START key. DATE AND TIME
4
Press the FUNCTION
key. VARIOUS SETTINGS
5 Press the START key. ECM: ON
6 Press the </> keys until
the display shows --->
ECM: OFF
7
Press the START key
to confirm the setting,
then STOP key to
restore the fax to the
initial waiting mode.
AUTOMATIC RX
06-03-99 12:12
-7-46-54.p65 02/04/01, 9.23 52