Olivetti FS-519, Service Manual

Page: 99 / 111

Field Service Ver.
3
.0 Jan. 200
11
. Jam display
93
FS-519/PK-510/OT
-602
T
roubleshooting
11
.3.3 Exit section misfeed
A. Detection timing
B. Action
11
.3.4 Finisher bundle exit misfeed
A. Detection timing
B. Action
Type Description
Finisher exit section mis-
feed detection
The transport sensor (PS2) is not turned ON even after the set period of
time has elapsed after the entrance sensor (PS1) is turned ON by the
paper.
The transport sensor (PS2) is not turned OFF even after the set period of
time has elapsed after the entrance sensor (PS1) is turned OFF by the
paper.
Relevant electrical parts
Entrance sensor (PS1)
Transport sensor (PS2) FS control board (FSCB)
MFP board (MFPB)
Step Action
WIRING DIAGRAM
Control signal
Location
(Electrical
component)
1 Initial check items — —
2 PS1 sensor check FSCB PJ19FSCB-11 (ON) FS-519 C-7
3 PS2 sensor check FSCB PJ19FSCB-14 (ON) FS-519 C-7
4 Change FSCB — —
5 Change MFPB — —
Type Description
Finisher bundle exit
misfeed detection The storage tray detect sensor (PS3) is not turned OFF even after the set
period of time has elapsed after the exit motor (M4) is energized.
Relevant electrical parts
Storage tray detect sensor (PS3)
Exit motor (M4) FS control board (FSCB)
Step Action
WIRING DIAGRAM
Control signal
Location
(Electrical
component)
1 Initial check items — —
2 PS3 sensor check FSCB PJ14FSCB-8 (ON) FS-519 C-12
3 M4 operation check FSCB PJ10FSCB-5 to 8 FS-519 C-3
4 Change FSCB — —
Y10
8442-7
Service Manual