6 2
1.
Press the upper or lower part of the key
until the display shows:
SETTINGS
2.
Press function key F3:
The display shows:
PIN CODE
3.
Press function key F3:
The display shows:
PIN CODE ?
4.
Type the default PIN on the keypad of the cordless
phone. Then press function key F3:
The display shows:
NEW PIN ?
5.
Type the new PIN on the keypad of the cordless phone.
Then press function key F3:
The display shows:
CONFIRM PIN ?
6.
Type the new PIN again on the keypad of the cordless
phone. Then press function key F3:
The display shows:
PIN CODE
7.
To exit from programming mode, press function key
F1 twice:
N O T A
In step
4
, if you type and confirm an incorrect code, the cordless
phone beeps and prompts you to type the PIN again. If you
think you have typed a wrong digit, you can delete it by
pressing the
key.
In step
6
, if you type and confirm a code different from the one
set in step
5
, the cordless phone beeps and prompts you to
type the PIN code again.
T
O
RESTORE
THE
DEFAULT
PARAMETERS
If desired, you can restore the default parameters
(name of cordless phone, warning tones, ringing vo-
lume and tune, PIN, etc.) as follows:
1.
Press the upper or lower part of the key
until the display shows:
SETTINGS
2.
Press function key F3:
The display shows:
PIN CODE
3.
Press the upper or lower part of the key
until the display shows:
RESTORE SETTINGS
4.
Press function key F3:
The display shows:
PIN CODE ?
5.
Type the PIN on the keypad of the cordless phone.
Then press function key F3:
The cordless phone restores the default parameters:
this operation takes a few seconds. At the end of the
procedure, the cordless phone returns automatically
to stand-by mode.
N O T A
If you can’t remember the PIN, you can restore the default
parameters. Proceed as follows:
1. Remove the batteries from the cordless phone.
2. Keep the
key of the cordless phone pressed, while you
reinsert the batteries in their compartment (make sure you
respect the battery polarities indicated).
3. The display of the cordless phone shows the message
"RESTORE SETTINGS".
4. Press function key F3 (
): the cordless phone restores the
default parameters, as indicated at the end of the previous
procedure.
T
O
SET
THE
ALARM
If desired, you can program the cordless phone to
ring at a set time, to act as an alarm or reminder.
1.
Press the upper or lower part of the key
until the display shows:
DATE AND TIME SETTINGS
2.
Press function key F3:
The display shows:
SET DATE
3.
Press the upper or lower part of the key
until the display shows:
SET ALARM
4.
To program the alarm, press function key F3:
5.
Type the time at which you want the cordless phone to
ring. Then press function key F3:
The display shows:
1 2 3 4 5
6.
To choose one of the 5 available ringing tunes, press
the upper or lower part of the key:
7.
To confirm your choice, press function key F3:
The display shows:
ALARM REPEAT
Summary of Contents for FaxLab 145D
