Olivetti Fax_Lab 146D, Instructions Manual

Page: 84 / 88

MANUFACTURER’S
CE
DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A Via Jervis, 77 - IVREA (TO) - ITALY
Declares under its sole responsibility that:
the product described in this guide
is in compliance with directive 99/5/EC dated 9
th
march 1999
fulfill the essential requirements of Electromagnetic Compatibility and of Electrical Safety as prescribed by the
Directives:
89/336/EEC dated 3
rd
May 1989 with subsequent amendments (Directive 92/31/EEC dated 28
th
April 1992 and
Directive 93/68/EEC dated 22
nd
July 1993);
2006/95/EC dated 27
th
December 2006 ;
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022/A2 : 2003 (Limits and methods of measurements of radio interference characteristics of Information Technology
Equipment) / Class B;
EN 61000-3-2/A1: 2002 (Electromagnetic Compatibility (EMC) - Part 2 : Limits - Section 2 : Limits for harmonic current
emissions (equipment input current
≤
16 A per phase);
EN 61000-3-3/A1: 2002 (Electromagnetic Compatibility (EMC) - Part 3 : Limits - Section 3 : Limitation of voltage
fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including 16A);
EN 55024/A1 : 2002 (Electromagnetic Compatibility - Information technology equipment - Immunity characteristics -
Limits and methods of measurement);
EN 60950-1/A1 : 2004 (Safety of Information Technology Equipment, including electrical business equipment).
Moreover the model is in compliance with following Standards:
ETSI TBR 38 : May 1998 Requirements for a terminal equipment incorporating an analogue handset function capable of
supporting the justified case service when connected to the analogue interface of the PSTN in Europe.
ETSI ES 203 021 : January 2006 Access and Terminal (AT); Harmonized basic attachment requirements for Terminals for
connection to analogue interfaces of the Telephone Networks.
ETSI EN 301 406 : 2003 Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced
Cordless Telecommunications covering essential requirements under article 3.2 of the R&TTE Directive Generic radio.
ETSI EN 301 489-6 : 2002 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part6: specific conditions for Digital Enhanced Cordless
Telecommunications (DECT) equipment.
ETSI EN 301 489-1 : 2005 Electromagnetic compatibility and radio spectrum Matters (ERM); Electromagnetic
compatibility (EMC) standard for radio equipment and services; Part1: Common technical requirements.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Olivetti S.p.A.
Scarmagno, 8
th
march 2007
Notes: 1) CE Marking has been affixed in 2007.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards.
Olivetti S.p.A. Sede Sociale Ivrea,Via Jervis,77 – Cap. Soc. Euro 154.000.000 – C.C.I.A.A. Torino n. 547040 – Trib Ivrea Reg. Soc. n. 1927 – Cod. Fisc. e Part. IVA 02298700010