background image

6 9

TRANSMITTING

A document is being sent.

TRANSMITTING...

A document is being sent.

TX COMPLETED

Transmission was completed successfully.

TX FROM MEMORY

You have set transmission from the memory.

TX INTERRUPTED

You aborted transmission by pressing the 

 key.

TX SET

You have set a document transmission from the memory.

DIALLING

The fax machine is dialling the number of the correspondent
you called.

DOC.N. XXXX

You have set a document transmission from the memory and
the fax machine has just finished storing the document. "XXXX"
corresponds to the number that identifies the document you
have just stored.

DOCUMENT READY

You have inserted the document in the ADF correctly.

LIFT HANDSET

The correspondent has made a talk request: lift the handset to
start the conversation.

LINE ON HOLD, PRESS HOLD

You have put a telephone call on hold by pressing the 

key: press the 

 key again to resume the conversation

with the correspondent.

NEW PRINT CART.? 1=YES  0=NO

You have installed a disposable print cartridge for the first
time or you have removed and reinstalled it: select the rel-
evant answer. If you answer yes but the print cartridge is not
new, the fax machine will not detect the out of ink condition.

ON LINE

You have engaged the line by lifting the handset of the tel-
ephone connected.

PLEASE WAIT

The fax machine is carrying out a procedure.

POLL RX HH:MM

You have made a transmission request (Polling reception).

POLL SET

You have set a polling reception.

PRINTING

The fax machine is printing a report or a list.

PRINTING MEMORY

If the printing paper runs out or jams or the ink in the print
cartridge runs out, the fax machine stores the documents re-
ceived. Once the fax machine's normal operating conditions
have been restored, it will print the documents present in the
memory.

RX INTERRUPTED

You aborted reception by pressing the

 

 key.

STORING

The fax machine is saving the pages of the document to be
copied.

Summary of Contents for Fax_Lab 146D

























































































Reviews: