25
M
AKING
A
CALL
When you engage the line by
lifting the telephone handset
, you
may use all the telephone functions available on ordinary telephones
sold on the market.
These also include the
R
function (REGISTER RECALL, activated by
pressing the
key) which provides access to the special services
made available by the company that manages the telephone network.
You can also use the following functions:
•
Call the correspondent using the fast dialling procedures set, see
“
Telephoning with one-touch dialling
” and “
Telephoning with
speed dialling
”.
•
Momentarily hold a telephone call
by pressing the
(
HOLD
) key. The call is resumed as soon as the same key is
pressed again.
•
Activate the "
handsfree
" function, by pressing the
key
before or during a telephone call. This function is useful if you want
other persons at your end to take part in the conversation.
T
ELEPHONING
WITH
ONE
-
TOUCH
DIALLING
CASE 1
Do not place the original document in the ADF.
1. Press the desired numeric key, for example, for more than
one second (in example
):
-
The display shows the associated telephone number that
you stored (see “
Setting one-touch and speed dialling
”,
chapter “
Basic transmission and reception operations
”).
If a name was also associated with it, the display will show
this, too.
2. Once the number has been dialled, if the correspondent is
free, you can lift the handset and start talking
or
to activate the handsfree function, press the key:
The display shows the length of the call in minutes and
seconds in the top right-hand corner.
CASE 2
Do not place the original document in the ADF.
1. To activate the handsfree function, press the key:
The display shows:
ON LINE 00:00
and the length of the call in minutes and seconds in the top
right-hand corner.
2. Press the desired numeric key (in example
):
-
The display shows the associated telephone number that
you stored. If you also associated a name with it, the display
will show this, too.
T
ELEPHONING
WITH
SPEED
DIALLING
CASE 1
Do not place the original document in the ADF.
1. Lift the handset to engage the line.
or
to activate the handsfree function, press the key:
The display shows:
ON LINE 00:00
and the length of the call in minutes and seconds in the top
right-hand corner.
2. Press the key:
The display shows:
TEL CALL
CODE OR < >
3. Type the desired speed dialling code, for example
-
. To do so, press the keys:
-
The display shows the stored telephone number (see
“
Setting one-touch and speed dialling
”, chapter “
Basic
transmission and reception operations
”).
If a name
was also associated with it, the display will show this, too.
Once the number has been dialled, if the correspondent is
free you can start talking.
4. To start the dialling procedure, press the key:
Once the number has been dialled, if the correspondent is
free you can start talking.
CASE 2
Do not place the original document in the ADF.
1. Press the key:
The display shows:
ADDRESS BOOK
CODE OR < >
2. Type the desired speed dialling code, for example
-
. To do so, press the keys:
-
The display shows the stored telephone number. If a name
was also associated with it, the display will show this, too.
3. To start the dialling procedure, press the key:
4.
Once the number has been dialled, if the correspondent is
free you can start talking
or
to activate the handsfree function, press the key:
The display shows the length of the call in minutes and
seconds in the top right-hand corner.
