Olivetti EXPLOR@ 950 LED, Service Manual

Page: 19 / 49

5.
Connect heads of all the cables to the ports of the back I/O panel of the POS device.
6. Feed the black head (with power connector) of the VGA cable (item I. ) through the 2
nd
display support (item C. ).
7. Connect the black head (with power connector) and the power connector of the VGA cable to the VGA port and
power input jack of the back I/O panel of the 2
nd
display (item A. ), and then tighten the four M3 screws to fix the
2
nd
display support onto the 2
nd
display as shown below.
I
C
A
G
Y116500-1 Service Manual 1-13