21
ENGLISH
4. Press the [clear] key to program another feature otherwise exit the
program mode by turning the PRG key to the OFF position.
Example: Program a standard 3% add-on rate.
Type/Press:
[0300] + [0] + [+%/PO] + [clear]
Fraction Rounding
Fraction rounding is used to round figures with decimals up or down
to the nearest whole numbers and is used for percent tax, percent
discount and percent add-on calculations. The machine is preset with
rounding code "50" where a fraction under one half pence is rounded
down one pence, a fraction above one half pence is rounded up one
pence. Choose from the following three options to select the rounding
as needed:
Rounding Code
Fraction Rounding
00
a fraction of a pence is rounded down one pence
50
a fraction under one half pence is rounded
down one pence, a fraction above one half pence
is rounded up one pence
99
a fraction of a pence is rounded up one pence
For the Swiss franc, French franc, Danish krone and Swedish krona
currencies, you can program the machine so that the subtotal and total
of a transaction are automatically rounded accordingly whenever the
[st/w/tax/2nd] or [amt tend/total] key is pressed. For the possible
rounding options available, refer to the section Rounding Option for
Swiss, French, Danish and Swedish Currencies.
Setting the Rounding Code
Proceed as follows to program fraction rounding:
1. Turn the PRG key to the PRG position.
2. Type the [rounding code] and press the [charge] key. The pro-
grammed rounding code is automatically printed along with the
caption "CHARGE".
3. Press the [clear] key to program another feature, otherwise exit the
program mode by turning the PRG to the OFF position.
Example: Program the rounding code so that a fraction of a pence is
rounded down one pence.
Type/Press:
[00] + [charge] + [clear]
Decimal Point Position
The decimal point setting is preset to the x.xx format. This format
can be changed, as needed, to one of the other settings below.
Changing the Decimal Point Position
Proceed as follows to define a new position for the decimal point.
1. Turn the PRG key to the PRG position.
2. Type the status number [0, 1, 2 or 3] to select the desired format as
indicated in the following table:
Status Number
Format
0
x
1
x.x
2
x.xx
3
x.xxx
