5-2
Maintenance
Cleaning
Clean the machine regularly to ensure optimum copy quality.
Original Cover, Document Processor and Platen
Wipe the rear side of the optional document processor or original cover
and the platen with a soft cloth dampened with alcohol or diluted mild
detergent.
Original Cover (Document Processor)
Platen
Slit Glass
If black streaks or other soiling appears in copies when the optional
document processor is used, clean the slit glass and white guide with the
cleaning cloth provided. The message:
Clean the slit glass for original
fed from DP
(
Clean the slit glass for original fed
) may be displayed if the
slit glass requires cleaning. After cleaning, press [End].
1
Remove the cloth from the cleaning cloth compartment.
2
Open the document processor and wipe slit glass
A
.
CAUTION
For safety, always unplug the power cord before
cleaning the machine.
IMPORTANT
Do not use thinner or other organic solvents.
Clean the slit glass for original fed from DP.
located on the left side and the reading
guide on the document processor with
the supplied dry cloth.
2.Clean the surface of the slit glass
1.Open the document processor.
4.Press [END].
If the slit glass is dirty, black line
3.Close the document processor.
will appear on the copy.
IMPORTANT
Lightly wipe the slit glass and white guide with a dry
cloth. To remove adhesive material or ink, apply alcohol to a cloth and
wipe lightly. Do not use water, thinner, or organic solvents.
A
Summary of Contents for d-Copia 2500
Page 1: ...d Copia 2500 d Copia 3000 Cod 541503en GB...
Page 60: ...3 18 Basic Operation...
Page 100: ...6 20 Troubleshooting...
Page 114: ...Index 4...
