Olivetti d-Copia 12, Service Manual

Page: 56 / 78

6-2 Service Manual Y101700-5
Sim No. Kind of main code Sub code Operation
26 Various setup 01 Manual feed setup
02 SPF setup
03 Second cassette setup
04 Machine duplex setup
06 Destination setup
07 Machine conditions check
20 Rear edge void setup
30 CE mark conformity control ON/OFF setup
37 Cancel of stop at developer over
39 Memory capacity setup
40 Polygon motor OFF time setup
42 Transfer ON timing control setup
43 Side void setup
30 Sensor operation 01 Paper sensor display status
check (standard
provision)
43 Fusing temp. 01 Normal copy
setup 04 Fusing temperature setup 2
46 Exposure 01 Copy density adjustment
adjustment 19 Gamma table adjustment (Copy mode)
48 Magnification 01 Front/rear scan ditrection
ratio correction
50 Lead edge 01 Lead edge image position adjustment
adjustment Paper lead edge/rear edge void adjustment
10 Paper center OC/Document center offset
51 Timing 02 Resist quantity adjustment
adjustment
61 Laser system 03 Pligon motor check (HSYNC output check)
operation
63 Shading 01 Shading check
64 Self print 01 Self print only with the engine (1 by 2 mode)