3-18
Sending Faxes > Continuous Scan
Continuous Scan
Scan a large number of originals in separate batches and then produce as one job. Originals will be scanned
continuously until you select [
Finish Scan
].
FAX Direct Transmission
Scans all originals into memory, then dials and sends. Scanning of the originals starts after the connection is made with
the receiving system, allowing you to verify that each page of the fax has been properly sent.
Cancelling Direct Transmission
During direct transmission, to cancel communication during transmission, select the [
Stop
] key on the operation panel or
[
Cancel
] on the touch panel. The originals that have been scanned are ejected, and the screen returns to the send
default screen. When originals remain in the document processor, take them out.
Setting for Direct transmission
Description
On
Starts direct transmission.
Dials the receiving system, and after the communication has started, originals are
scanned.
Off
Starts memory transmission.
After originals are scanned into memory, the communication starts.
NOTE
In direct transmission, you can designate only one destination for one transmission.
In the basic screen for sending, select [
Direct
]. This selects the direct transmission method and the keys on the touch
panel are highlighted.
NOTE
In some cases, transmission may take place even if the [
Stop
] key or [
Cancel
] is selected.
Summary of Contents for d-COLORMF3023
Page 1: ...Code 597300en d COLORMF3024 FAX OPERATION GUIDE...
Page 190: ......