Olivetti d-Color MF 4003, Service Manual

Page: 153 / 688

d-Color MF4003/MF3303
F DISASSEMBLY/REASSEMBLY > 6. PF-P20/PF-P21
F-55
[2] [3] [1] [2]
[1] [1] [2] [2]
3. Disconnect five connectors [1] from the PC control board.
4. Remove four screws [2], and remove the PC control board [3].
5. To reinstall, reverse the order of removal.
6.7 Drive motor (M1) (PF-P20/PF-P21)
1. Remove the rear cover.
F.6.1 Rear cover (PF-P20)
F.6.2 Rear cover (PF-P21)
[2] [1]
[2] [3]
2. Disconnect the connector [1].
3. Remove four screws [2] and remove the drive motor [3].
NOTE
▪ When removing or installing the motor, do not hold the rotor but hold
the plate of the motor or the board.
4. To reinstall, reverse the order of removal.
6.8 Drive assy (PF-P20/PF-P21)
1. Remove the rear cover.
F.6.1 Rear cover (PF-P20)
F.6.2 Rear cover (PF-P21)
2. Remove the drive motor.
F.6.7 Drive motor (M1) (PF-P20/PF-P21)
[2] [3]
[1]
3. Disconnect two connectors [1], and remove the harness from two wire saddles
[2] and the edge cover [3].
[1]
[1]
[2]
4. Remove three screws [1], and remove the drive assy [2].
5. To reinstall, reverse the order of removal.
6.9 Lift-up motor (M2) (PF-P20/PF-P21)
1. Remove the rear cover.
F.6.1 Rear cover (PF-P20)
F.6.2 Rear cover (PF-P21)
2. Remove the drive motor.
F.6.7 Drive motor (M1) (PF-P20/PF-P21)
Y119930-3 Service Manual