Olivetti d-COLOR MF 2400, User Manual

Page: 66 / 123

Sending a Fax to a Combination of Fax Numbers (Chain Dial) 3-24
Sending a Fax to a Combination of Fax
Numbers (Chain Dial)
Multiple fax numbers can be combined to specify the recipients. This is
called “chain dialing”.
For example, if the phone number and the extension number of a recipient
are registered as different speed dial destinations, the fax number of the
recipient can be specified by combining the two numbers.
1
Position the document to be faxed.
2
If desired, select the image quality.
d
For details, refer to “Selecting the Image Quality” on page 3-7.
3
Press the On hook key.
4
Directly type in the first number, or select it from the favorite list or speed
dial destinations.
d
Refer to “Specifying a Recipient” on page 3-9.
5
Directly type in the second number, or select it from the favorite list or
speed dial destinations.
6
Press the
Start
key to begin scanning and sending the fax.
d
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the
Select
key.
d
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the
Start
key.