Oliver 738-V, User'S Operating And Instruction Manual, Page: 18 / 32

0738S20031 6-8
15. Now that the pusher has been attached to the slide block, grab the handle with
your left hand and remove the quick pin by pulling on the ring (Fig A). The pin
can then be placed in the hole on the flange atop the chute (Fig B).
Figure A Figure B
16. Lastly, carefully replace the front guard by making sure the slots on the front
blade guide line up with the slicing blades. Fasten the guard to the cover by
tightening down the thumb screw.