Oliver 738-V, User'S Operating And Instruction Manual, Page: 10 / 32

0738S20006 5-1
TROUBLE SHOOTING
WARNING
ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY TYPE OF MAINTENANCE TASK, INCLUDING
TROUBLESHOOTING.
Slicer will not start
•
The machine is not plugged in.
•
There is no power at the outlet.
•
The cover is not on correctly. The cover has an interlocking mechanism that
allows the unit to operate only if the cover is on.
•
Broken wire or disconnected terminals.
•
The switch actuator cam is not contacting the switch. Lift the cover and adjust
the screw with a flat head screw driver.
Pusher interference when slicing product
•
Loosen pusher and adjust side to side to make sure there is no interference.
•
Blade frame is not correctly placed on slide blocks.
•
Pusher blades are bent or damaged. Contact dealer or factory.
Extreme effort needed to slice product
•
Blades are dull. Contact dealer or factory for replacements.
•
Product is too stale or old. The slicer is designed to be most efficient with slicing
fresh or day old product.