Oliver 738-V, User'S Operating And Instruction Manual, Page: 16 / 32

0738S20031 6-6
8. Once the drive assembly has been located, place the blade cartridge posts in the
tracks on the base assembly. Apply slight pressure to the front and rear of the
blade cartridge to ensure the proper fit in to the drive assembly and slide blocks.
9. You can now replace the post hold down blocks that you set aside in step 5.
NOTE: The cover assembly will not fit on the unit if the protective blade cover is left in
place.
CHANGING THE BLADES
Oliver Packaging and Equipment suggests that blades not be changed in the field due to
the potential for injury. We offer a blade frame cartridge exchange program for when
blades become dull. Please contact your dealer or the Oliver service department.
10. Use the brush provided to remove any crumbs and/or residue from the rear blade
guide.
11. You can now wipe down the entire interior surface of the infeed chute using a
mild cleaning solution.
NOTE: Be aware that product may build up at the bottom of the slots on the infeed
chute. If so, use a wet rag to remove it.