Oliver 738-V, User'S Operating And Instruction Manual, Page: 12 / 32

0738S20031 6-2
WARNING
NOW THAT THE FRONT GUARD HAS BEEN REMOVED, THE SLICING BLADES
WILL BE EXPOSED. USE CAUTION WHEN MOVING ON TO THE NEXT STEP.
2. With the handle in the up position, insert the quick pin through the slot in the
chute into the hole on the slide block. This will keep the slide block attached and
allow for easy reassembly. Remove the pusher bracket by removing the (2) two
thumbscrews on the front of the block. Use damp rag to wipe away any debris
from the pusher bracket.
3. Loosen the (2) two thumb screws on the sides of the unit near the front and lift
the cover. Use the cover props to secure the cover in the upright position.