Oliver 738-V, User'S Operating And Instruction Manual, Page: 15 / 32

0738S20031 6-5
CLEANING
Now that the blade frames have been safely removed you can now proceed with
removing any crumb deposits within the machine. A brush, compressed air, or a
vacuum are helpful tools for this task.
REPLACING THE BLADE CARTRIDGE
6. Make sure that the drive assembly is in the correct position as shown below.
NOTE: The blade cartridge will only fit back into the machine with the drive assembly in
the correct configuration below. The Bearing holes need to be at the position nearest
each other.
CORRECT INCORRECT
7. With the protective blade guard in place locate the center of the bearings in the
drive assembly with the pin plates attached to the blade cartridge.