HP-400P HORIZONTAL BAND RESAW -42-
SECTION 7
：
MAINTENANCE
---------------------------------------------------------------------------------------
WARNING
：
Always disconnect power to the machine before performing maintenance. Failure to do this may result in
serious personal injury.
Cleaning
Inside Wheel Cover
To keep the bandsaw working properly, regularly open the wheel cover and vacuum any sawdust from the
machine that did not make it into the dust collector.
Conveyor Belts
Use compressed air to clean the built-up sawdust from the conveyor belts. Eye injuries frequently occur when
cleaning with compressed air—wear safety glasses to protect you. Also wear a dust mask or respirator to
protect your lungs from airborne dust particles.
Hydraulic Elevation Rams
Use a dry rag to remove sawdust from the hydraulic elevation rams, and then wipe the rams down with a
light coat of hydraulic fluid.
Painted Surfaces
These areas may be cleaned with a dry or damp rag; however, make sure you Do not clean bare metal
surfaces with a damp rag or they may rust.
