HP-400P HORIZONTAL BAND RESAW -24-
9. DIMENSION UNIT SELECTING
The user can choose MM or INCH inaccordance with their common use.
To turn off the power and Press
button, then turn on the power to change the dimension unit.
DIAGRAM 9
：
The current dimension unit shown is (MM)
The current dimension unit shown is (INCH)
10. OBVIATION & CAUSE OF THE DISPLAY MINUS
1. Controller shows It means wrong dimension.
The controller can't running in the minus range.
2.Correcting way
：
Please reload correct dimension data.
3. Please reference Page 2 chapter 4.
To turn off the power.
Then Press the
button and turn on the power.
The display shows automatically a new figure on basis of MM
unit and right one decimal point.
To turn off the power.
Then Press the
button and turn on the power.
The display shows automatically a new figure on basis of INCH
unit and right two decimal point.
