⚠
WARNING
Read and understand this manual completely and observe all
warning labels on the machine. Oliver Machinery has made every
attempt to provide a safe, reliable, easy-to-use piece of machinery. Safety,
however, is ultimately the responsibility of the individual machine operator.
With any piece of machinery, the operator must exercise caution, patience
and common sense to safely run the machine. Before operating this
product, become familiar with the safety rules in the following sections.
Always wear safety goggles or safety glasses with side shields
complying with current national standards, and a full-face shield
when needed.
Always keep guards in place and in proper operation condition!
Use blade guard for every applicable operation including all
through cuts. If guard is removed for special non-through cuts,
such as dado and rabbet cuts, replace blade guard before further
use of the saw.
Keep hands out of line with the saw blade. Never reach around or
over the saw blade.
Oliver 10010 10" Job Site Saw Owner's Manual
5
