G.
AUXILIARY FENCE
This saw comes with a L-shape
auxiliary fence for narrow rip. When
ripping material 1/8” or thinner, to
prevent workpiece from slipping under
the fence, the auxiliary fence must be
used. Lift the auxiliary fence from right
side of the fence toward the blade side
as shown in
FIG. 29
.
FIG. 30
shows the
auxiliary fence is in use.
H.
MITER GAUGE
The miter gauge can slide on either side
of the blade in the slots as shown in
FIG. 31
. To change the angle, release
the knob on the miter gauge and set to
desired angle as shown in
FIG. 32
.
FIG. 30
Auxiliary Fence
Miter Gauge Knob
Knob
FIG. 32
FIG. 31
Miter Gauge Rail Slots
FIG. 14
FIG. 29
Auxiliary Fence
Oliver 10010 10" Job Site Saw Owner's Manual
22
