39
please input the item. The default 0.0.0.0 and means every IP of Internet
can get some information of the device with SNMP protocol.
Click on “Save” to store what you just selected or “Undo” to give up.
Advanced Setup > Advanced Setting > Routing
Routing Tables
Allows you to determine which physical interface address to use for
outgoing IP data grams. If you have more than one router and subnets,
you will need to enable routing table to allow packets to find proper
routing path and allow different subnets to communicate with each
other.
Routing Table settings are settings used to setup the functions of
static and dynamic routing.
Dynamic Routing
Routing Information Protocol (RIP) will exchange information
about destinations for computing routes throughout the network.
Please select RIPv2 only if you have different subnet in your
network. Otherwise, please select RIPv1 if you need this protocol.
Static Routing
For static routing, you can specify up to 8 routing rules. You can
enter the destination IP address, subnet mask, gateway, hop for each
routing rule, and then enable or disable the rule by checking or
un-checking the Enable checkbox.
Click on “Save” to store what you just selected or “Undo” to give up.
Summary of Contents for Nexus V-R9
Page 1: ...1...
