33
MAC Address Control allows you to assign different access rights to different
users and to assign a specific IP address to a certain MAC address.
MAC Address Control
Check “Enable” to enable the “MAC Address Control”. All of the settings in
this page will take effect only when “Enable” is checked.
Connection control
Check "Connection control" to enable the controlling of which wired and
wireless clients can connect to this device. If a client is denied to connect to
this device, it means the client can't access to the Internet either. Choose
"allow" or "deny" to allow or deny the clients, whose MAC addresses are not in
the "Control table" (please see below), to connect to this device.
Association control
Check "Association control" to enable the controlling of which
wireless client can associate to the wireless LAN. If a client is
denied to associate to the wireless LAN, it means the client can't send or
receive any data via this device. Choose "allow" or "deny" to allow or deny the
clients, whose MAC addresses are not in the "Control table", to associate to
the wireless LAN.
1:
Click on “Save” to store what you just selected or “Undo” to give up.
2:
Click on “Next Page” to go down or “Previous page” back to last
page.
Advanced Setup > Security Setting > Miscellaneous
Administrator Time-out
The time of no activity to logout automatically, you may set it to zero to
disable this feature.
Summary of Contents for Nexus V-R9
Page 1: ...1...
