16
H
eat
D
etector
tI 150
Proceed as follows if no smell, smoke or fire has developed in the area being monitored:
■
Ensure that there are no suspicious smell, smoke or fire developments in the area
being monitored.
■
Deactivate the alarm by ventilating the room in which the heat detector has been
triggered.
Or
■
Deactivate the alarm via the alarm system base unit (refer to the operating manu-
al enclosed with the alarm system).
■
Please note that deactivation of the alarms is delayed. The process takes up to
40 seconds after deactivation on the alarm system.
■
Deactivate the alarm by pressing the Test button (5) on the heat detector.
If several heat detectors are being used, the alarm from the detector trigger-
ing the alarm remains active. This serves to localise the heat detector
triggering the alarm. Press the Test button (2) on the heat detector triggering
the alarm. The alarm is completely deactivated.
