12
H
eat
D
etector
tI 150
Wireless alarm
If several heat detectors are connected via a wireless link and an alarm is triggered on
one of them, the alarm is also triggered on the other heat detectors connected.
The signal LED (4) flashes in the sequence (signal (0.5 s), signal (0.5 s), pause (1.5 s)).
Acoustic signals are issued coinciding with the flashing signals.
If no other wireless alarm signal is triggered within 60 seconds, the heat detector switch-
es to Normal mode (refer to Normal mode on page 11).
Press the Test button (5) to activate Mute mode (refer to Mute mode on page 13).
Each alarm is activated for 10 minutes. After 10 minutes, the alarm is either extended or
ended automatically, depending on the temperature.
Low battery charge
If the batteries have reached a low battery charge, the heat detector signals that a
change of batteries is necessary.
The heat detector issues an acoustic signal every 32 seconds; the signal LED (4) also
flashes at intervals of 32 seconds.
Press the Test button (5) to interrupt the acoustic signal for low battery charge for about
8 - 10 hours. The heat detector then switches to Normal mode and operates as usual.
It is recommended to change the batteries immediately (refer to Changing the Batteries