Olimpia splendid DOLCECLIMA BREZZA, Instructions For Use And Maintenance Manual

Page: 49 / 354

DOLCECLIMA BREZZA
EN - 17
ENGLISH
3.9 - SLEEP MODE
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are active.
a
. This mode can be selected by pressing B3; the “Sleep mode” LED (S7) activates on the display of the
control panel. The appliance will decrease (when cooling) or increase (when heating) the set temperature
by 1°C (1 or 2 F) for 1 hour.
b
. To stop the function, press key (B3) on the remote controller; the LED (S7) switches off.
3.10 - TIMER MODE
This mode can be used to activate a switching on/off timer of the appliance.
To activate the appliance SWITCHING ON timer, work as follows:
a
. With the appliance in stand-by mode (with the power plug connected), press the keys B2 or SW5.
b
. When the LED S6 flashes, set the desired time value through the keys B4/B5 or SW3/SW4
(0h (Timer off) ---> 1h ---> 2h ---> .. 24h ---> 23h ---> 22h ---> .. 0h (Timer off) ---> ..).
c
. The LED S6 remains steady on.
d
. The appliance will switch on automatically when it reaches the previously set time.
To activate the appliance SWITCHING OFF timer, work as follows:
a
. With the appliance switched on (LED S8 active), press the keys B2 or SW5.
b
. When the LED S6 flashes, set the desired time value through the keys B4/B5 or SW3/SW4
(0h (Timer off) ---> 1h ---> 2h ---> .. 24h ---> 23h ---> 22h ---> .. 0h (Timer off) ---> ..).
c
. The LED S6 remains steady on.
d
. The appliance will switch off automatically when it reaches the previously set time.
3.11 - SWING FUNCTION
• This function can be activated only from the remote control.
a
. When the appliance starts, the flap (23)opens completely.
b
. Press the key “
SWING
” (B8) on the remote control and the flap starts oscillating automatically.
c
. Press the key “
SWING
” (B8) to stop the flap in a certain position.
Press it again to restart oscillation.
3.12 - WIFI FUNCTION
a
. Press SW6 for approximately 5 seconds to activate the “Wifi” function, the LED (S10) starts to blink.
When the appliance connects with your smartphone, the LED ( S10 ) stops blinking and remains
switched on steadily on the display.
The instructions for connection to the WiFi network and for use oft he App are available on
www.olimpiasplendid.com in the download area.
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning inter-
vention, always make sure you disconnected the power plug
from the power socket.
Do not touch the metal parts of the appliance when you re-
move the filter. There is a risk of injury due to the sharp metal
edges.
Do not use water to clean the internal parts of the air conditioner.
Exposure to water can ruin the isolation, with the risk of electric shocks.