OLI NO-TOUCH, User Manual

Page: 17 / 60

17
EN
RU
DE
2
1
MANUAL CALIBRATION
To calibrate the servomotor you need to press the button at the back of the sensor.
The button should be pressed during 30 seconds or more (1) until the two blue flushes (2) light
up.
After the blue light appears, you can calibrate by placing your hand over one of the capacitive
buttons.
When positioning the hand over the half flush capacitive button (A), the servomotor will move to
the left. If you place your hand over the full flush capacitive button (B) the servomotor will move
to the right.
> 0:00:30.00
1 2
ZOOCK!!
0º
CHECK