OLI NO-TOUCH, User Manual

Page: 9 / 60

9
EN
RU
DE
Once the sensor is connected to the power
source, it will confirm that it has energy
through 3 consecutive flashes.
After the standby period has elapsed, the
calibration routine starts automatically and
its completion is communicated again by
3 consecutive flashes. The system is ready
for use.
There is a 20-second period in which
the user / installer should complete the
installation and place the system in its final
operating position.
2
Note: For proper operation of the product, calibration must be performed with the sensor /
flush plate in its final operating position. Otherwise, the product may not detect the user or
cause incorrect or unwanted flushes. If any of these symptoms occur, turn off the system and
follow this procedure again.
1
3
X3
00.00 0:00:20.00
CLICK
2
1
X3
CALIBRATION
To ensure correct operation of the flush plate over a variety of environmental conditions - temperature and
humidity - the sensor is equipped with an automatic calibration function (procedure)
In the ceramic flush plate there
is no feedback (the flashes are
not visible in the ceramic flush
plate).
In the ceramic flush plate there
is no feedback (the flashes are
not visible in the ceramic flush
plate).